Product overview / Introduction
Brand : Shichun New Energy
Model Name: SCR1500
Application: Engine carbon cleaning, SCR/DPF cleaning, Emission test
Gas production (L/H): 1500 ± 10%
Certifications: CE, EMC, ISO9001
Manufacturing Origin: China
Why should do carbon cleaning for vehicle?
Because of poor road conditions, poor fuel quality, bad driving habits and poor air quality etc., these reasons bring out increased carbon deposition. The increased carbon deposition will effect the vehicle performance, like engine components failures, fuel consumption increased, excessive exhaust emission, lose horsepower and so on.
Why should do three-ways catalytic converter and dpf cleaning?
After the vehicle running over 2 years, the car performance will be degrated, the main problems are exhaust emission exceed standard, it caused by three-ways catalytic converter block.
Using Shichun New Energy multifunctions car care equipments, use the Negative oxygen ion restore liquid clean the three-ways catalytic converter or dpf at first, then using the high reducibility feature of hydrogen gas to restore the three-ways catalytic conveter and dpf as the new one.
This comprehensive treatment project can reduce emission over 30% and make fuel saving and horsepowr improving etc.
Shichun New Energy SCR1500 features
1. With multi functions to provide one stop service for customers, for three-way catalytic converter cleaning and restore, engine carbon cleaning, exhaust emission testing and print, idle speed testing and print.
2. Upgraded generator, electrolyzer and IGBT power supply, with better performance.
3. Rebuild machine inside structure, integrated thermal system, machine can working continuous and with longer life.
4. Zero accident, machine with 12 safety devices to make sure machine safety operation and working. (Wet-type anti-back fire, Dry-type anti-back fire, Water level probe, Pressure sensor, Temperature sensor, IGBT power, Smart pump, Cooling fan, Overflow tube, Industrial Oxy-hydrogen generator etc.)
5. Big smart operating screen, intelligent electronic control work with mechanical control, double control, double safe.
6. Keep research and development, produce the best product adapt to marketing requirements.
1. Renew the engine in 20 minutes, no need disassemble the engine for cleaning.
2. Reduce emission over 50%, totally restore the catalytic converter.
3. Improve horsepower around 30%.
4. Fuel saving around 15%.
5. Reduce the engine noise and extend its lifetime.
6. Lifetime over 8 years, it is a profitable and continuous business for end users.
SCR1500 is the new model which is developed in year 2020. It has 3 functions, engine carbon cleaning, catalytic converter or dpf cleaning and exhaust emission test and printing.
220V±10%, 50/60Hz, Single phase
SCR cleaning time
Exhaust emission data
Testing and printing
Water adding method
Type of cooling
Power protection grade
Distilled water or soft water
4 steps to operate the machine.
1.Emission test and data printed
a.Put the emission inspection tool inside of exhaust pipe of the car,then start the car
b.Make machine connecting to power,then switch on the machine,emission data will be shown up on the display,press K button,it will show current data then press S to lock the data,then press Print botton to print the data.
Please keep the data which is tested before catalytic converter cleaning and carbon cleaning for comparing.
2.Catalytic converter cleaning
a.Disassemble EGOS of the car,connect catalytic converter cleaning pipe to EGOS connector of the car
b.Select catalytic converter cleaning on the touch screen,set 4 mins for catalytic converter cleaning,and press Start on the touch screen to start catalytic converter cleaning.
c.When 4 mins is done,keep cleaning fluid dip in catalytic converter for 15 mins
d.After 15 mins,operate car,make engine at 3500rpm 5-6 times,the cleaning fluid will be exhausted and finish catalytic converter cleaning.
3.Engine carbon cleaning
a.Clip vibrator sensor on the engine and connect hho gas output pipe to air fliter of the car.
b.Keep engine at idle speed
c.Select carbon cleaning on the touch screen,set 20 mins for cleaning process,make sure gas production value is 0,and press Start to make carbon cleaning process start working.
d.Adjust gas production to 1000lph then machine works properly.
e.When time is count down,machine will stop automatically,then go to operate car,and make speed at 3500rpm 5-6 times,to release the exhaust out.
4.Re-test the exhaust emission data for comparing.
Follow preivous step to test and print exhaust emission data to compare.